Kuo Lab Wiki

User Tools

Site Tools

You are here: start » computers » firewall_configuration
computers:firewall_configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
computers:firewall_configuration [2011/08/31 12:22] – [Destination NAT] chkuocomputers:firewall_configuration [2020/08/16 00:13] (current) – [References] chkuo
Line 5: Line 5:
 net.ipv4.ip_forward=1 net.ipv4.ip_forward=1
 </code> </code>
 +Apply by ''sudo sysctl -p''
  
 Then add the following lines to ''/etc/rc.local'' (so the rule is enabled on reboot): Then add the following lines to ''/etc/rc.local'' (so the rule is enabled on reboot):
Line 11: Line 12:
 # alter the source address of the packets from the internal network # alter the source address of the packets from the internal network
 Ext_IF="eth0" Ext_IF="eth0"
-Ext_IP="140.109.56.179" +Ext_IP="1.1.1.1" 
-Int_IF="eth3" +Int_IF="eth1" 
-iptables -t nat -A POSTROUTING -s 192.168.1.0/16 -o $Ext_IF -j SNAT --to-source $Ext_IP +Int_Net="192.168.1.0/24" 
-iptables -A FORWARD -s 192.168.1.0/16 -o $Ext_IF -j ACCEPT +iptables -t nat -A POSTROUTING -s $Int_Net -o $Ext_IF -j SNAT --to-source $Ext_IP 
-iptables -A FORWARD -d 192.168.1.0/16 -i $Int_IF -m state --state ESTABLISHED,RELATED -j ACCEPT+iptables -A FORWARD -s $Int_Net -o $Ext_IF -j ACCEPT 
 +iptables -A FORWARD -d $Int_Net -i $Int_IF -m state --state ESTABLISHED,RELATED -j ACCEPT
 </code> </code>
  
Line 21: Line 23:
 <code bash> <code bash>
 # destination NAT # destination NAT
-# forward ssh to Int_IP if the public Ext_IP_2 was used  +# forward ssh to Int_IP if the external IP Ext_IP_2 was used  
-Ext_IP_2="1.2.3.4"+Ext_IP_2="1.1.1.2"
 Int_IP="192.168.1.2" Int_IP="192.168.1.2"
 iptables -t nat -I PREROUTING -p tcp -d $Ext_IP_2 --dport 22 -j DNAT --to-destination $Int_IP:22 iptables -t nat -I PREROUTING -p tcp -d $Ext_IP_2 --dport 22 -j DNAT --to-destination $Int_IP:22
Line 39: Line 41:
 ===== References ===== ===== References =====
   * [[https://help.ubuntu.com/10.04/serverguide/C/firewall.html]]   * [[https://help.ubuntu.com/10.04/serverguide/C/firewall.html]]
 +  * [[https://www.networkreverse.com/2020/06/how-to-build-linux-router-with-ubuntu.html]]
computers/firewall_configuration.1314764525.txt.gz · Last modified: 2011/08/31 12:22 by chkuo