Differences

This shows you the differences between two versions of the page.

--- computers:mdadm [2011/02/03 17:21] – chkuo
+++ computers:mdadm [2011/08/24 15:15] (current) – chkuo
@@ Line 1: / Line 1: @@
 ====== mdadm ======
 ===== Usage =====
+  * Overview: <code bash>cat /proc/mdstat</code>
   * To view the status of an array: <code bash>sudo mdadm --detail /dev/md0</code>
-  * To mark a device as faulty: <code bash>sudo mdadm /dev/md0 --set-faulty /dev/sda</code>
+  * To mark a device as faulty: <code bash>sudo mdadm /dev/md0 --set-faulty /dev/sda1</code>
-  * To remove a failed or spare device: <code bash>sudo mdadm /dev/md0 --remove /dev/sda</code>
+  * To remove a failed or spare device: <code bash>sudo mdadm /dev/md0 --remove /dev/sda1</code>
-  * To add a device: <code bash>sudo mdadm /dev/md0 --add /dev/sda</code>
+  * To add a device: <code bash>sudo mdadm /dev/md0 --add /dev/sda1</code>
 ===== Note =====
 Ubuntu server 10.04.1 installer has a known bug that prevents new installation on software RAID system from booting correctly (see [[http://ubuntuforums.org/showthread.php?t=1474950]] for more details). One possible solution to get around this problem is to setup disk partition and software RAID using 9.10 installation CD before installing 10.04.
+===== Sample partition =====
+  * HD: 500Gb * 3 (RAID 1, 1 hot spare)
+    * /dev/md0: /boot, 200Mb, primary, ext2
+    * /dev/md1: swap, 8G, primary
+    * /dev/md2: /, 200Gb, primary, ext4
+    * /dev/md3: /var, 150Gb, logical, ext4
+    * /dev/md4: /home, 100Gb, logical, ext4
+    * /dev/md5: /tmp, max, logical, ext4