Kuo Lab Wiki

User Tools

Site Tools

You are here: start » computers » ubuntu_workstation_basic_setup
computers:ubuntu_workstation_basic_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
computers:ubuntu_workstation_basic_setup [2024/09/06 16:05] – [Mount disk] chkuocomputers:ubuntu_workstation_basic_setup [2024/09/11 12:08] (current) – chkuo
Line 1: Line 1:
-===== Ubuntu Workstation Basic Setup =====+====== Workstation ====== 
 +  * Ubuntu workstation basic setup
  
- +===== BIOS =====
-==== BIOS ====+
   * before installing Ubuntu, power on the workstation, enter the BIOS setting, and update the boot setting. CD/DVD-ROM should be listed as the 1st choice, following by the hard drive for Ubuntu installation   * before installing Ubuntu, power on the workstation, enter the BIOS setting, and update the boot setting. CD/DVD-ROM should be listed as the 1st choice, following by the hard drive for Ubuntu installation
  
-==== Ubuntu ====+===== Ubuntu =====
    * Use the latest long-term support (LTS) version    * Use the latest long-term support (LTS) version
    * Install the system on the smaller/faster SSD; use the larger/slower HDD for '/backup' and/or '/scratch'    * Install the system on the smaller/faster SSD; use the larger/slower HDD for '/backup' and/or '/scratch'
  
-==== SSH ====+===== SSH =====
   * Install the OpenSSH server    * Install the OpenSSH server 
     * The OpenSSH client is installed by default (so you can ssh into other computers). The OpenSSH server is required for connection into this machine (e.g., auto backup from the lab server). Use ''sudo apt-get install openssh-server'' to install.     * The OpenSSH client is installed by default (so you can ssh into other computers). The OpenSSH server is required for connection into this machine (e.g., auto backup from the lab server). Use ''sudo apt-get install openssh-server'' to install.
Line 18: Line 18:
      * Install Fail2ban: ''sudo apt-get install fail2ban''      * Install Fail2ban: ''sudo apt-get install fail2ban''
  
- +===== Network =====
- +
-==== Network ====+
     * The system administrator requires the HWaddr of the Network Interface Controller (NIC) to add the new machine to the DHCP server.     * The system administrator requires the HWaddr of the Network Interface Controller (NIC) to add the new machine to the DHCP server.
     * In Terminal, type "ifconfig" to get the HWaddr of eth0 (format = XX:XX:XX:XX:XX:XX). Write down this string and send it to the administrator.     * In Terminal, type "ifconfig" to get the HWaddr of eth0 (format = XX:XX:XX:XX:XX:XX). Write down this string and send it to the administrator.
Line 27: Line 25:
  
  
-==== Nvidia drivers ====+===== Nvidia drivers =====
   * official drivers of nvidia graphic card (gnu) is required for better performance.   * official drivers of nvidia graphic card (gnu) is required for better performance.
   * check nvidia graphic card information    * check nvidia graphic card information 
Line 36: Line 34:
   * Take Quadro 600 for example, the driver version is 340.65   * Take Quadro 600 for example, the driver version is 340.65
  
-Remove old version+==== Remove old version ====
   * For example, remove version 331   * For example, remove version 331
 <code> <code>
Line 47: Line 45:
 $ sudo apt-get install nvidia-340 $ sudo apt-get install nvidia-340
 </code> </code>
-Change nvidia settings+ 
 +==== Change nvidia settings ====
   * [[http://manpages.ubuntu.com/manpages/lucid/en/man1/nvidia-xconfig.1.html|nvidia-xconfig]]   * [[http://manpages.ubuntu.com/manpages/lucid/en/man1/nvidia-xconfig.1.html|nvidia-xconfig]]
   * [[http://manpages.ubuntu.com/manpages/precise/en/man1/alt-nvidia-current-settings.1.html|nvidia-settings]]   * [[http://manpages.ubuntu.com/manpages/precise/en/man1/alt-nvidia-current-settings.1.html|nvidia-settings]]
  
  
-==== Java ====+===== Java =====
 <code> <code>
 $ sudo apt-get install icedtea-7-plugin openjdk-7-jre $ sudo apt-get install icedtea-7-plugin openjdk-7-jre
Line 83: Line 82:
 </code>  </code> 
  
-==== Mount disk ====+===== Mount disk =====
 If necessary, create a new partition and format the new disk If necessary, create a new partition and format the new disk
 <code> <code>
Line 106: Line 105:
 To mount a disk automatically during start-up, find the UUID using ''blkid'' and add the disk to ''/etc/fstab'' To mount a disk automatically during start-up, find the UUID using ''blkid'' and add the disk to ''/etc/fstab''
 <code> <code>
-$ blkid -s UUID+$ sudo blkid -s UUID
 /dev/sda1: UUID="2cf0b317-a030-4cb4-a78a-4f4893ac16d1"  /dev/sda1: UUID="2cf0b317-a030-4cb4-a78a-4f4893ac16d1" 
 /dev/sdb1: UUID="f5d3494d-2d43-485f-97e8-2f9b1b967d90"  /dev/sdb1: UUID="f5d3494d-2d43-485f-97e8-2f9b1b967d90" 
computers/ubuntu_workstation_basic_setup.1725609911.txt.gz · Last modified: 2024/09/06 16:05 by chkuo